ChamSys MagicQ Manuel d'utilisateur Page 74
- Page / 139
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
ChamSys Ltd www.chamsys.co.uk
MagicQ User Manual 74 Version 1.3.0.0
11 Live Programming (Busking)
11.1 Adding individual channels using preset faders
Individual channels can be added into the show as required using the Intensities Windows. Channels
can be added using the faders in either the Programmer View or the Presets View.
Channels added in the Programmer View are added into the programmer in the usual way. If the
programmer is cleared then they are cleared. Channels added using the Presets View are not affected
by operations on the programmer - they act like preset faders.
Channels added in both views are affected by the Grand Master and by the pressing of SWAP buttons.
11.2 Over-ride / take-over
The MagicQ architecture intrinsically supports the combined use of the programmer, playbacks and
preset faders so that there is no need to constantly swap between modes, losing your overridden effects.
This makes the console ideal for busking shows.
ADD and SWAP buttons work regardless of whether you are programming or playing back. Similarly
the programmer works as an over-ride, regardless of what you are doing.
By default, the console makes no distinction between programming and run modes. Some operators
may wish to restrict what is allowed in run mode – this can be configured in the Setup Window. You
can choose to disable programming or to disable modification of programmed Cues / Cue Stacks.
11.3 Viewing Cues and Cue Stacks
The Cue and Cue Stack Windows are used to monitor and adjust the execution of Cues and Cue Stacks
respectively. To open both windows on the screen sized appropriately you can use the predefined Cue
Stacks view – press CTRL and select the Cue Stacks soft button. Both windows monitor the current
playback.
For a Cue Stack with a single Cue recorded on it, then the Cue Stack window will not be of much
interest. In this case the Cue can be monitored and adjusted using the Cue Window.
For a Cue Stack with multiple Cues, the Cue Stack window can be used to watch the progress of the
Cue Stack. The position within the Cue Stack can be changed along with the timing information. You
can make the Cue Stack window follow the Cue currently executing on the selected playback - set the
Display Current Cue option to YES in the Cue Stack Window.
11.4 Modifying chase speed / contrast
To modify the speed or contrast of a Cue Stack that is running with Chase Timing, press the SELECT
button for the playback, and then adjust the encoders in the Cue Stack Window. The chase direction
and chase type (Normal, Bounce, Random) can also be selected. Pressing and holding the SELECT
button of a Playback with a chase on it automatically opens the Cue Stack Window.
Use the top right encoder to modify individual attributes - Position, Beam, Colour, Intensity In and
Intensity Out (soft button selects the different attributes). Once the speed of an attribute is changed it is
- MagicQ User Manual 1
- ChamSys Ltd 2
- TABLE OF CONTENTS 3
- 1 Introduction 10
- 2 Console Concepts 12
- 2.3 Cues 13
- 2.4 Cue Stacks 13
- 2.5 Playbacks 14
- 2.6 Pages 14
- 2.8 Window layouts 15
- 2.9 Shift Functions 15
- 2.10 The Programmer 15
- 2.11 Help 15
- 3 Quick Start 16
- 3.7 Selecting Heads 17
- 3.8 Recording a Group 18
- 3.9 Naming a Group 18
- 3.10 Recalling a Group 18
- 3.11 Locating Heads 18
- 3.12 Modifying Attributes 19
- 3.13 Recording a Palette 19
- 3.14 Adding in FX 20
- 3.15 Recording a Cue 20
- 3.17 Playing back your show 21
- 4 Console Layout 22
- 4.2 Playback Area 23
- 4.3 Head Control Area 24
- 4.4 Editor Area 24
- 4.5 Windows Select Area 25
- Common Actions 27
- 4.9 Moving items 28
- 4.10 Copying items 28
- 4.11 Removing items 28
- 4.12 Recording items 29
- 4.13 Actions on Playbacks 29
- 5 Patching 30
- 5.5 Head names and numbers 31
- 5.6 Gel name and number 32
- 5.7 Generating auto groups 32
- 5.8 Inverting and Swapping 32
- 5.10 Dimmer curves 33
- 5.14 Morphing heads 34
- 5.15 Importing heads 34
- 5.16 Exporting heads 35
- 5.18 Merging with DMX input 35
- 6 Setting Dimmer levels 37
- 6.4 Using Selected Heads 38
- 6.8 Selecting Heads 41
- 6.9 Using Groups 41
- 6.12 Locating Heads 43
- 6.13 Modifying Attributes 43
- 6.14 Flip 44
- 6.15 Copy between heads 45
- 6.16 Head Macros 45
- 6.18 Adding in FX 47
- 7 Palettes 51
- 7.3 Naming Palettes 52
- 7.4 Updating Palettes 52
- 8 Programmer 56
- 8.4 Recording a Cue 57
- 8.5 Record Options 58
- 8.6 Removing channels 59
- 8.7 Blind programming 59
- 8.9 Editing Cues 60
- 8.12 Snapshot 60
- 9 Cue Stacks 61
- 9.3 Cue Timing 62
- 9.4 Tracking 63
- 9.7 Copying and Moving Cues 65
- 10 Playback 66
- 10.1 Playback Display 67
- 10.3 Fader control 67
- 10.4 Playback Buttons 68
- 10.5 Playbacks Window 70
- 10.7 Default Cue Stacks 72
- 10.8 Group Masters 72
- 10.6 Wing Playbacks Pages 72
- 10.9 Playback Stomping 73
- 10.10 Playback priority 73
- 11.2 Over-ride / take-over 74
- 11.5 Modifying FX parameters 75
- 11.9 Adding in new FX 76
- 11.12 Busking Master 77
- 12 System Management 78
- 12.5 Loading Shows 79
- 12.6 Erasing 79
- 12.9 File Manager 80
- 12.11 Status Window 81
- 12.12 Editing Heads 81
- 12.13 Backup Archives 81
- 13 Settings 83
- 13.3 Wing Settings 84
- 13.4 Security settings 85
- 13.5 Programming settings 86
- 13.6 Playback Settings 89
- 13.7 General Settings 90
- 13.8 Cue Storage Settings 91
- 13.9 Interface Settings 91
- 13.10 Port Settings 92
- 13.12 Hardware Settings 93
- 13.16 LED brightness 95
- 13.17 Locking the console 95
- 13.18 Button test mode 95
- 14 Advanced Programming 97
- 14.4 HTP handling 98
- 14.5 LTP handling 99
- 14.6 Creating rig plans 99
- 14.7 Time-code support 100
- 14.8 Scheduled Events 100
- 15 MagicQ Multi Windows 101
- 16 Head Editor 101
- 16.1 General View 102
- 16.2 Channels View 103
- 16.3 Ranges View 104
- 16.4 Palettes View 105
- 16.5 Macros View 106
- 17.1 Patching LED on MagicQ 106
- 17.5 Using bitmaps 108
- 17.6 Using text strings 109
- 18 External Interfaces 111
- 18.3 Remote trigger input 114
- 19 Using Multiple Consoles 116
- 20 Execute Window 118
- 21 Media Servers 120
- 21.3 Live previews 121
- 21.4 Media layer selection 121
- 22 The MagicQ At A Glance 123
- 23 Troubleshooting 124
- 24 Button Functions 125
- 25 Licensing 136
- 26 Glossary 137
© 2020, manymanuals.fr. Tous droits réservés | 0.684 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels