ChamSys MagicQ Manuel d'utilisateur télécharger pdf (Page 65)

ChamSys Ltd www.chamsys.co.uk

MagicQ User Manual 65 Version 1.3.0.0

To record a Cue into a Cue Stack in the Cue Stack Store Window set up the look as above, open the

Cue Store Window, press RECORD and press the Cue Stack you wish to record the Cue into. If the

Cue stack is empty then a new Cue Stack will be generated. Otherwise the Cue will be added to the

existing Cue Stack, either at the specified Cue Id, or at the end of the Cue Stack.

You can test programmed Cues and Cue Stacks in the Cue Store and Cue Stack Store by pressing the

appropriate Cue or Cue Stack. The console searches for an unused playback (from the last playback

down) to test the Cue on. Pressing the Cue or Cue Stack again removes the Cue or Cue Stack from the

playback.

You can restart a Cue or Cue Stack that is being tested by pressing the "Retest" soft button. Holding

CTRL and selecting a Cue or Cue Stack also restarts the Cue / Cue Stack.

You can view the contents of a programmed Cue by moving he cursor to the required Cue in the Cue

Store Window and pressing the View Cue soft button. This opens the Cue Window locked to the

specified Cue. Pressing the Unlock Cue button returns the Cue Window to monitoring the current Cue

on the currently selected playback.

You can view the contents of a programmed Cue Stack by moving he cursor to the required Cue Stack

in the Cue Stack Store Window and pressing the View Stack soft button. This opens the Cue Stack

Window locked to the specified Cue Stack. Pressing the Unlock Stack button returns the Cue Stack

Window to monitoring the Cue Stack on the currently selected playback.

9.6 Assigning Cues and Cue Stacks

Cues and Cue Stacks can be assigned to Playbacks at any time.

To assign a Cue, open the Cue Store Window, press the MOVE button, select a Cue, and then select a

playback to assign the Cue to. You can assign to real playbacks or to playbacks in the Playbacks

Window. You can assign to a specific Cue Id in a Cue Stack on a playback, by keying in a Cue Id

before you select the playback.

To assign a Cue Stack, open the Cue Stack Store Window, press the MOVE button, select a Cue Stack,

and then select an empty playback to assign the Cue to. You can assign to real playbacks or to

playbacks in the Playbacks Window.

Multiple Cues and Cue Stacks can be assigned at a time, by using SHIFT and the cursor keys to select

multiple Cues and Cue Stacks in the appropriate window.

9.7 Copying and Moving Cues

Cues can be copied and moved within a Cue stack using the standard move and copy procedures. For

example, to move a cue, press COPY, select the source, then select the destination. To copy multiple

cues, press and hold COPY, select multiple entries, release COPY and select the destination.

When copying or moving within a Cue Stack, Cues the Cues are moved or copied before the destination

Cue that you select. To copy or move onto the end of the Stack select "End" as the destination.

Cues can be copied onto other Cue Stacks that are assigned to playbacks. Select the Cues in the Cue

Stack window and then select a playback fader as the destination.

By default when copying Cues, the console does not create new cues - it simply makes another link to

the existing Cue. To force the console to create a new cue press SHIFT and COPY.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 138 139

Pas de commentaire

ChamSys MagicQ Manuel d'utilisateur Page 65