ChamSys MagicQ Manuel d'utilisateur Page 103
- Page / 139
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
ChamSys Ltd www.chamsys.co.uk
MagicQ User Manual 103 Version 1.3.0.0
CMY invert controls the colour mixing channels – press ENTER to set Yes or No. The default
configuration is for heads that do CMY – i.e. the when the Cyan channel is at 100% and the Magenta
and Yellow channels are at 0% you get Cyan. If your head uses RGB colour mixing – i.e. the above
combination gives Red – then set the CMY Invert option.
16.2 Channels View
This view allows the different channels of the head to be specified. Note that once a head of the type
has been patched it is not possible to change the number of channels of the head.
Channels can be added using the Insert soft button and deleted using the Remove Button (press twice to
Remove).
16bit channels are indicated by setting the 16bit coarse and 16bit fine field for the appropriate channels.
For normal 8bit channels both fields should be set to no. The 16bit fine and coarse attributes of a
moving light do not have to be on adjacent channel numbers.
The Instant field specifies whether a channel by default snaps immediately to new values rather than
fading – this is useful for colour wheels and gobo wheels where you want immediate changes.
The Slow Encoder field makes the encoder works more slowly than normal. This is good for attributes
where every possible DMX value represents a different function and therefore only very small turns of
the encoder are required to change function.
The Attrib no field indicates to the console what the function of the channel is. No two channels should
have the same Attrib no except for the two channels comprising a 16bit parameter. The attribute number
determines whether the attribute is classed as Intensity, Position, Colour or Beam and which of the eight
encoders it is assigned to:
Encoder A Encoder E
Encoder B Encoder F
Encoder C Encoder Y
Encoder D Encoder X
Double click on the attrib field, or press Enter to step through the possible attributes or enter the
attribute number from the tables below.
Intensity attributes (I1)
- -
- -
- -
- Intensity (0)
Position attributes (P1)
Pos1 (46) Pos5 (50)
Pos2 (47) Pos6 (51)
Pos3 (48) Pan (4)
Pos4 (49) Tilt (5)
- MagicQ User Manual 1
- ChamSys Ltd 2
- TABLE OF CONTENTS 3
- 1 Introduction 10
- 2 Console Concepts 12
- 2.3 Cues 13
- 2.4 Cue Stacks 13
- 2.5 Playbacks 14
- 2.6 Pages 14
- 2.8 Window layouts 15
- 2.9 Shift Functions 15
- 2.10 The Programmer 15
- 2.11 Help 15
- 3 Quick Start 16
- 3.7 Selecting Heads 17
- 3.8 Recording a Group 18
- 3.9 Naming a Group 18
- 3.10 Recalling a Group 18
- 3.11 Locating Heads 18
- 3.12 Modifying Attributes 19
- 3.13 Recording a Palette 19
- 3.14 Adding in FX 20
- 3.15 Recording a Cue 20
- 3.17 Playing back your show 21
- 4 Console Layout 22
- 4.2 Playback Area 23
- 4.3 Head Control Area 24
- 4.4 Editor Area 24
- 4.5 Windows Select Area 25
- Common Actions 27
- 4.9 Moving items 28
- 4.10 Copying items 28
- 4.11 Removing items 28
- 4.12 Recording items 29
- 4.13 Actions on Playbacks 29
- 5 Patching 30
- 5.5 Head names and numbers 31
- 5.6 Gel name and number 32
- 5.7 Generating auto groups 32
- 5.8 Inverting and Swapping 32
- 5.10 Dimmer curves 33
- 5.14 Morphing heads 34
- 5.15 Importing heads 34
- 5.16 Exporting heads 35
- 5.18 Merging with DMX input 35
- 6 Setting Dimmer levels 37
- 6.4 Using Selected Heads 38
- 6.8 Selecting Heads 41
- 6.9 Using Groups 41
- 6.12 Locating Heads 43
- 6.13 Modifying Attributes 43
- 6.14 Flip 44
- 6.15 Copy between heads 45
- 6.16 Head Macros 45
- 6.18 Adding in FX 47
- 7 Palettes 51
- 7.3 Naming Palettes 52
- 7.4 Updating Palettes 52
- 8 Programmer 56
- 8.4 Recording a Cue 57
- 8.5 Record Options 58
- 8.6 Removing channels 59
- 8.7 Blind programming 59
- 8.9 Editing Cues 60
- 8.12 Snapshot 60
- 9 Cue Stacks 61
- 9.3 Cue Timing 62
- 9.4 Tracking 63
- 9.7 Copying and Moving Cues 65
- 10 Playback 66
- 10.1 Playback Display 67
- 10.3 Fader control 67
- 10.4 Playback Buttons 68
- 10.5 Playbacks Window 70
- 10.7 Default Cue Stacks 72
- 10.8 Group Masters 72
- 10.6 Wing Playbacks Pages 72
- 10.9 Playback Stomping 73
- 10.10 Playback priority 73
- 11.2 Over-ride / take-over 74
- 11.5 Modifying FX parameters 75
- 11.9 Adding in new FX 76
- 11.12 Busking Master 77
- 12 System Management 78
- 12.5 Loading Shows 79
- 12.6 Erasing 79
- 12.9 File Manager 80
- 12.11 Status Window 81
- 12.12 Editing Heads 81
- 12.13 Backup Archives 81
- 13 Settings 83
- 13.3 Wing Settings 84
- 13.4 Security settings 85
- 13.5 Programming settings 86
- 13.6 Playback Settings 89
- 13.7 General Settings 90
- 13.8 Cue Storage Settings 91
- 13.9 Interface Settings 91
- 13.10 Port Settings 92
- 13.12 Hardware Settings 93
- 13.16 LED brightness 95
- 13.17 Locking the console 95
- 13.18 Button test mode 95
- 14 Advanced Programming 97
- 14.4 HTP handling 98
- 14.5 LTP handling 99
- 14.6 Creating rig plans 99
- 14.7 Time-code support 100
- 14.8 Scheduled Events 100
- 15 MagicQ Multi Windows 101
- 16 Head Editor 101
- 16.1 General View 102
- 16.2 Channels View 103
- 16.3 Ranges View 104
- 16.4 Palettes View 105
- 16.5 Macros View 106
- 17.1 Patching LED on MagicQ 106
- 17.5 Using bitmaps 108
- 17.6 Using text strings 109
- 18 External Interfaces 111
- 18.3 Remote trigger input 114
- 19 Using Multiple Consoles 116
- 20 Execute Window 118
- 21 Media Servers 120
- 21.3 Live previews 121
- 21.4 Media layer selection 121
- 22 The MagicQ At A Glance 123
- 23 Troubleshooting 124
- 24 Button Functions 125
- 25 Licensing 136
- 26 Glossary 137
© 2020, manymanuals.fr. Tous droits réservés | 1.556 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels