ChamSys MagicQ Manuel d'utilisateur Page 47
- Page / 139
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
ChamSys Ltd www.chamsys.co.uk
MagicQ User Manual 47 Version 1.3.0.0
changes fan the heads apart whilst negative changes fan the heads together. Fan mode cannot be used
when Single or Highlight modes are active since fanning only makes sense when more than one head is
under control.
Pressing and holding the FAN button enters FAN mode temporarily. Releasing FAN the FAN button
returns to the normal mode.
There are 3 types of FAN
Asymmetric (default, as in previous s/w) – fans from centre asymmetric
Symmetric – fans from the centre symmetric
End – fans from the end
To change the FAN type, press SHIFT + FAN. In FAN mode the current FAN type is shown in the
status display window (Fan-A, Fan-S, Fan-E).
The following short-cuts also work:
Hold FAN + press LOCATE. Returns to default FAN type – asymmetric.
Hold FAN + press NEXT HEAD. Chooses next FAN type.
Hold FAN + press PREV HEAD. Chooses previous FAN type.
6.17.6 All
The ALL button is used to return the head control area to the default mode whereby all heads in the
current selection are controlled.
Pressing ALL when there are no heads selected causes the selected heads that were active when
CLEAR was last pressed to be reselected.
Pressing SHIFT and ALL selects all the heads of the type last selected.
6.18 Adding in FX
To apply a FX to some heads, select the heads then from the FX Window, Group Window, or Prog Window
press the ADD FX soft button. Choose the FX to apply.
You can apply multiple FX to a head, provided that the FX uses different attributes - e.g. you can mix a
Pan Sine with a Tilt Sine.
Some of the FX are not specific to particular attributes of the head – these are marked with a * – e.g.
Ramp, Sine and Cosine. When one of these is selected you are prompted for which attribute you wish
to apply the FX to. For instance you could program a circle using a Sine on the Pan attribute and a
Cosine on the Tilt attribute. Alternatively you could just use the circle FX!
Once you have chosen a FX you are returned to the Prog Window. Use the encoders to modify the
parameters of the FX such as the speed, size and spread between heads.
The Prog Window provides a Simple and an Advanced View. The Simple View enables modifications of
the FX as applied to all heads. The Advanced View enables the parameters of the FX to be modified for
each different head – this, for example, enables different sizes to be set for different heads.
- MagicQ User Manual 1
- ChamSys Ltd 2
- TABLE OF CONTENTS 3
- 1 Introduction 10
- 2 Console Concepts 12
- 2.3 Cues 13
- 2.4 Cue Stacks 13
- 2.5 Playbacks 14
- 2.6 Pages 14
- 2.8 Window layouts 15
- 2.9 Shift Functions 15
- 2.10 The Programmer 15
- 2.11 Help 15
- 3 Quick Start 16
- 3.7 Selecting Heads 17
- 3.8 Recording a Group 18
- 3.9 Naming a Group 18
- 3.10 Recalling a Group 18
- 3.11 Locating Heads 18
- 3.12 Modifying Attributes 19
- 3.13 Recording a Palette 19
- 3.14 Adding in FX 20
- 3.15 Recording a Cue 20
- 3.17 Playing back your show 21
- 4 Console Layout 22
- 4.2 Playback Area 23
- 4.3 Head Control Area 24
- 4.4 Editor Area 24
- 4.5 Windows Select Area 25
- Common Actions 27
- 4.9 Moving items 28
- 4.10 Copying items 28
- 4.11 Removing items 28
- 4.12 Recording items 29
- 4.13 Actions on Playbacks 29
- 5 Patching 30
- 5.5 Head names and numbers 31
- 5.6 Gel name and number 32
- 5.7 Generating auto groups 32
- 5.8 Inverting and Swapping 32
- 5.10 Dimmer curves 33
- 5.14 Morphing heads 34
- 5.15 Importing heads 34
- 5.16 Exporting heads 35
- 5.18 Merging with DMX input 35
- 6 Setting Dimmer levels 37
- 6.4 Using Selected Heads 38
- 6.8 Selecting Heads 41
- 6.9 Using Groups 41
- 6.12 Locating Heads 43
- 6.13 Modifying Attributes 43
- 6.14 Flip 44
- 6.15 Copy between heads 45
- 6.16 Head Macros 45
- 6.18 Adding in FX 47
- 7 Palettes 51
- 7.3 Naming Palettes 52
- 7.4 Updating Palettes 52
- 8 Programmer 56
- 8.4 Recording a Cue 57
- 8.5 Record Options 58
- 8.6 Removing channels 59
- 8.7 Blind programming 59
- 8.9 Editing Cues 60
- 8.12 Snapshot 60
- 9 Cue Stacks 61
- 9.3 Cue Timing 62
- 9.4 Tracking 63
- 9.7 Copying and Moving Cues 65
- 10 Playback 66
- 10.1 Playback Display 67
- 10.3 Fader control 67
- 10.4 Playback Buttons 68
- 10.5 Playbacks Window 70
- 10.7 Default Cue Stacks 72
- 10.8 Group Masters 72
- 10.6 Wing Playbacks Pages 72
- 10.9 Playback Stomping 73
- 10.10 Playback priority 73
- 11.2 Over-ride / take-over 74
- 11.5 Modifying FX parameters 75
- 11.9 Adding in new FX 76
- 11.12 Busking Master 77
- 12 System Management 78
- 12.5 Loading Shows 79
- 12.6 Erasing 79
- 12.9 File Manager 80
- 12.11 Status Window 81
- 12.12 Editing Heads 81
- 12.13 Backup Archives 81
- 13 Settings 83
- 13.3 Wing Settings 84
- 13.4 Security settings 85
- 13.5 Programming settings 86
- 13.6 Playback Settings 89
- 13.7 General Settings 90
- 13.8 Cue Storage Settings 91
- 13.9 Interface Settings 91
- 13.10 Port Settings 92
- 13.12 Hardware Settings 93
- 13.16 LED brightness 95
- 13.17 Locking the console 95
- 13.18 Button test mode 95
- 14 Advanced Programming 97
- 14.4 HTP handling 98
- 14.5 LTP handling 99
- 14.6 Creating rig plans 99
- 14.7 Time-code support 100
- 14.8 Scheduled Events 100
- 15 MagicQ Multi Windows 101
- 16 Head Editor 101
- 16.1 General View 102
- 16.2 Channels View 103
- 16.3 Ranges View 104
- 16.4 Palettes View 105
- 16.5 Macros View 106
- 17.1 Patching LED on MagicQ 106
- 17.5 Using bitmaps 108
- 17.6 Using text strings 109
- 18 External Interfaces 111
- 18.3 Remote trigger input 114
- 19 Using Multiple Consoles 116
- 20 Execute Window 118
- 21 Media Servers 120
- 21.3 Live previews 121
- 21.4 Media layer selection 121
- 22 The MagicQ At A Glance 123
- 23 Troubleshooting 124
- 24 Button Functions 125
- 25 Licensing 136
- 26 Glossary 137
© 2020, manymanuals.fr. Tous droits réservés | 0.319 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels