ChamSys MagicQ Manuel d'utilisateur Page 58
- Page / 139
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
ChamSys Ltd www.chamsys.co.uk
MagicQ User Manual 58 Version 1.3.0.0
The timing information in the programmer is copied into the Cue. Cue timing can be set up before or
after the Cue is recorded.
There are two options for timing information:
Simple: stored for each type of attribute (HTP In, HTP Out, Position, Colour, Beam)
Advanced: stored on an individual channel basis
Timing information for the fade in and out of FX is configured in the FX view.
8.4.3 FX
The Cue stores FX information for each of the FX that is in the programmer.
8.5 Record Options
Record options can be accessed when recording by pressing SHIFT and RECORD or at any time using
the REC OPTIONS soft button in the Programmer Window.
8.5.1 Masking
The console supports comprehensive masking facilities to enable the operator to select which attributes
are recorded from the programmer into Cues.
By default there is no masking applied - all channels in the programmer are recorded into Cues. Two
types of masking can be applied - masking by attribute type and masking by attribute.
Masking by attribute type enables the operator to select which of the intensity, position, colour and
beam attribute types is recorded. Press the REC INT, REC POS, REC COL and REC BEAM soft
buttons to select the attribute types to be recorded.
Select attributes in the Record Options Window to select to record individual attributes into the Cue.
The Status Window indicates when any masking is active. Masking is cleared once a Cue is recorded -
this can be prevented by pressing the LOCK MASK soft button in the Record Options Window.
The Record Option Window displays individual attribute names based on the currently selected head so
that it is easy to recognise the attributes to select. If no heads are currently selected then it uses the first
active head in the programmer.
8.5.2 Options
The console supports several additional options for recording Cues. These include recording all the
channels from heads regardless of whether they are active in the programmer and recording only heads
that are currently selected. Press the REC OPTIONS soft button and select an option.
Record options return to the defaults once a Cue is recorded.
- MagicQ User Manual 1
- ChamSys Ltd 2
- TABLE OF CONTENTS 3
- 1 Introduction 10
- 2 Console Concepts 12
- 2.3 Cues 13
- 2.4 Cue Stacks 13
- 2.5 Playbacks 14
- 2.6 Pages 14
- 2.8 Window layouts 15
- 2.9 Shift Functions 15
- 2.10 The Programmer 15
- 2.11 Help 15
- 3 Quick Start 16
- 3.7 Selecting Heads 17
- 3.8 Recording a Group 18
- 3.9 Naming a Group 18
- 3.10 Recalling a Group 18
- 3.11 Locating Heads 18
- 3.12 Modifying Attributes 19
- 3.13 Recording a Palette 19
- 3.14 Adding in FX 20
- 3.15 Recording a Cue 20
- 3.17 Playing back your show 21
- 4 Console Layout 22
- 4.2 Playback Area 23
- 4.3 Head Control Area 24
- 4.4 Editor Area 24
- 4.5 Windows Select Area 25
- Common Actions 27
- 4.9 Moving items 28
- 4.10 Copying items 28
- 4.11 Removing items 28
- 4.12 Recording items 29
- 4.13 Actions on Playbacks 29
- 5 Patching 30
- 5.5 Head names and numbers 31
- 5.6 Gel name and number 32
- 5.7 Generating auto groups 32
- 5.8 Inverting and Swapping 32
- 5.10 Dimmer curves 33
- 5.14 Morphing heads 34
- 5.15 Importing heads 34
- 5.16 Exporting heads 35
- 5.18 Merging with DMX input 35
- 6 Setting Dimmer levels 37
- 6.4 Using Selected Heads 38
- 6.8 Selecting Heads 41
- 6.9 Using Groups 41
- 6.12 Locating Heads 43
- 6.13 Modifying Attributes 43
- 6.14 Flip 44
- 6.15 Copy between heads 45
- 6.16 Head Macros 45
- 6.18 Adding in FX 47
- 7 Palettes 51
- 7.3 Naming Palettes 52
- 7.4 Updating Palettes 52
- 8 Programmer 56
- 8.4 Recording a Cue 57
- 8.5 Record Options 58
- 8.6 Removing channels 59
- 8.7 Blind programming 59
- 8.9 Editing Cues 60
- 8.12 Snapshot 60
- 9 Cue Stacks 61
- 9.3 Cue Timing 62
- 9.4 Tracking 63
- 9.7 Copying and Moving Cues 65
- 10 Playback 66
- 10.1 Playback Display 67
- 10.3 Fader control 67
- 10.4 Playback Buttons 68
- 10.5 Playbacks Window 70
- 10.7 Default Cue Stacks 72
- 10.8 Group Masters 72
- 10.6 Wing Playbacks Pages 72
- 10.9 Playback Stomping 73
- 10.10 Playback priority 73
- 11.2 Over-ride / take-over 74
- 11.5 Modifying FX parameters 75
- 11.9 Adding in new FX 76
- 11.12 Busking Master 77
- 12 System Management 78
- 12.5 Loading Shows 79
- 12.6 Erasing 79
- 12.9 File Manager 80
- 12.11 Status Window 81
- 12.12 Editing Heads 81
- 12.13 Backup Archives 81
- 13 Settings 83
- 13.3 Wing Settings 84
- 13.4 Security settings 85
- 13.5 Programming settings 86
- 13.6 Playback Settings 89
- 13.7 General Settings 90
- 13.8 Cue Storage Settings 91
- 13.9 Interface Settings 91
- 13.10 Port Settings 92
- 13.12 Hardware Settings 93
- 13.16 LED brightness 95
- 13.17 Locking the console 95
- 13.18 Button test mode 95
- 14 Advanced Programming 97
- 14.4 HTP handling 98
- 14.5 LTP handling 99
- 14.6 Creating rig plans 99
- 14.7 Time-code support 100
- 14.8 Scheduled Events 100
- 15 MagicQ Multi Windows 101
- 16 Head Editor 101
- 16.1 General View 102
- 16.2 Channels View 103
- 16.3 Ranges View 104
- 16.4 Palettes View 105
- 16.5 Macros View 106
- 17.1 Patching LED on MagicQ 106
- 17.5 Using bitmaps 108
- 17.6 Using text strings 109
- 18 External Interfaces 111
- 18.3 Remote trigger input 114
- 19 Using Multiple Consoles 116
- 20 Execute Window 118
- 21 Media Servers 120
- 21.3 Live previews 121
- 21.4 Media layer selection 121
- 22 The MagicQ At A Glance 123
- 23 Troubleshooting 124
- 24 Button Functions 125
- 25 Licensing 136
- 26 Glossary 137
© 2020, manymanuals.fr. Tous droits réservés | 1.097 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels